STICKERS FOR THE MOTOCROSS


We look forward to your inquiries and orders.

TEL / 0569-47-8978
FAX / 0569-47-8979
E-mail / info@onsokufactory.com


*Product details, price list, etc. are listed at the bottom of the photo.

*When it clicks on the image, an expansion image can be shown.

MAX-PROTECT
MAX-PROTECT

This is an extremely-thick sticker protection film by the strong adhesion of the OnsokuFactory original.(It can be used for the simple repair of the exterior as well.) .

MAX-PROTECT CLEAR DECAL
MAX-PROTECT CLEAR DECAL

We produce clear decare using MAX-PROTECT. Material cost (MAX-PROTECT MP1) + cut charges come to need this.

Estimate reference example

Sticker production requires both design charges (or data production charges) and sticker rate basically.
In the case of the case that you can settle complete data for and the second production by the same data, the design charges (or data production charges) are free.

Example 1
When you want to produce it by the same design data again:0yen + sticker rate

Example 2
When you want to use the same design data in the other car model:10,000yen(Data price) + sticker rate

Example 3
When you can design you by handwriting and want to order it from us from data production:10,000yen-(Data price) + sticker rate

Example 4
When you are decided to undergo only your rough design:20,000yen-(Design price) + sticker rate

Example 5
When you want to order all it from us from a design:40,000yen-(Design price) + sticker rate

*In the event that there is a mistake or change in any of the prices listed on the website, the current estimate will take precedence in each case.

MOTOCROSS STICKER PRICE LIST

FULL SET
SIZE PRICE
50cc size 35,000yen
65cc size 44,000yen
85cc、4st150cc size 48,000yen
Full size 55,000yen
SET CONTENTS
*FR fender, shroud, fork guard, swing arm, F athlete's number, right and left side athlete's number, right and left air cleaner box, gas tank.
*There are an air cleaner box, the car model without the setting of the gas tank, too.
*Design charges may be caused separately.
*please see the list of following design charges, data production charges in detail.
*Neon color is 1.5 times the above price.

ATHLETE'S NUMBER SET
SIZE PRICE
50cc size 15,000yen
65cc、85cc、4st150cc size 19,000yen
Full size 21,000yen
SET CONTENTS
*FR fender, shroud, fork guard, swing arm, F athlete's number, right and left side athlete's number, right and left air cleaner box, gas tank.
*There are an air cleaner box, the car model without the setting of the gas tank, too.
*Design charges may be caused separately.
*please see the list of following design charges, data production charges in detail.
*Neon color is 1.5 times the above price.

HELMET STICKER SET
HELMET STICKER SET PRICE
All helmets 20,000yen
*Design charges may be caused separately.
*please see the list of following design charges, data production charges in detail.
*Neon color is 1.5 times the above price.

REPAIR PARTS
PARTS NAME PRICE
Front fender(S) 6,000yen
Front fender(M) 7,000yen
Front fender(L) 9,000yen
Rear fender(S) 6,000yen
Rear fender(K) 7,000yen
Rear fender(L) 9,000yen
Shroud(One side. 50cc) 8,000yen
Shroud(One side. 65cc,85cc,150cc) 9,000yen
Shroud(One side. Fullsize) 12,000yen
Shroud Set(right and left. 50cc) 14,000yen
Shroud Set(right and left. 65cc,85cc,150cc) 17,000yen
Shroud Set(right and left. Full size) 21,000yen
* Front athlete's number(50cc) 6,000yen
* Front athlete's number(Other than 50cc) 8,000yen
Side athlete's number(One side. 50cc) 6,000yen
Side athlete's number(One side. Other than 50cc) 10,000yen
Fork guard(One side. Other than 50cc) 6,000yen
Fork guard set(right and left. 50cc) 6,000yen
Fork guard set(right and left. 50cc以外) 8,000yen
Gas tank small S size set(right and left) 9,000yen
Gas tank small M size set(right and left) 12,000yen
Gas tank small L size set(right and left) 15,000yen
Gas tank small OVER size set(right and left) 20,000yen
Air cleaner box S size set(right and left) 6,000yen
Air cleaner box M size set(right and left) 7,000yen
Air cleaner box L size set(right and left) 8,000yen
Air cleaner box OVER size set(right and left) 10,000yen
Swing arm set (right and left) 6,000yen
Outer tube set (right and left) 6,000yen
Radiator louver set (right and left) 9,000yen
Hand guard set (right and left) 6,000yen
Neck guard 16,000yen
*The sticker of the gas tank includes the punching processing charges without air.
*We just produce the parts of the sticker which you ordered before.
*As for the new order only for repair parts, MAX-PROTECT logo becomes available somewhere of parts.
*Design charges may be caused separately.
*please see the list of following design charges, data production charges in detail.
*Neon color is 1.5 times the above price.

MAX-PROTECT MP1 + CUT RATE
MAX-PROTECT MP1 + CUT RATE PRICE
MAX-PROTECT MP1 + CUT RATE (8,800yen + 6,000yen) x m
*The production for the parts which are necessary for a 0.5m unit from 0.5m at the minimum is possible.
*Production of clear decare such as decoration protection, frame protection, the decare protection

MAX-PROTECT SPECIFICATIONS STICKER PRODUCTION RATE
PRODUCT NAME PRICE
MP1 cut(900mm x 0.5m) 4,400yen
MP1 STEALTH(Mat) cut(900mm x 0.5m) 4,400yen
MP1 roll(900mm x 30m) 223,000yen
MP1 STEALTH(Mat) roll(900mm x 25m) 185,000yen
MP2 roll(White for solvent ink 1,100mm x 48m) 297,000yen
MP2-NEON roll(Neon for solvent ink 1,000mm x 15m) 338,000yen
MP3 roll(Clear for solvent ink 1,100mm x 48m) 297,000yen
*The roll may have the increase and decrease of 1-2m with finish condition.
*We have not cut sales of MP2 and MP3.
*Available to 7,200 yen/m *3m a sample cut
*We have not cut sales of MP2-NEON.
*Available to 26,500 yen/m *3m a sample cut
*The roll build-to-order manufacturing (deposit).
*Please allow approximately 3-4 weeks for delivery.

DESIGN PRICE, DATA PRODUCTION PRICE
WORK DETAILS PRICE
Design price(full order purchase)
*Corporate designs, etc.
200,000yen-Free
Design price (full order purchase) 40,000yen-Free
Design support charges (with the design assistance) 20,000yen-Free
Data production price
(1set)
10,000yen-Free
Data production price
(1part)
5,000yen-Free
Adjustment fee for printing data
(1set)
5,000yen
Adjustment fee for printing data
(1part)
3,000yen
Data correction charges 3,000yen-Free
*One set includes two or more parts of the same vehicle.
*If corrections are required for the adjustment work for bringing in data for printing, a separate data correction fee will be charged.
*Data production charges are included in design charges, design support charges.

WORK PRICE
WORK DETAILS PRICE
Model production charges(Genuine parts that can be mass produced) 0yen
Model production charges(Mass-produced opaque genuine parts)
(1set)
0yen〜60,000yen
Model production charges(none of outside a company building parts)
(1set)
0yen〜60,000yen
Model production charges(Mass-produced opaque genuine parts)
(1part)
0yen〜20,000yen
Model production charges(none of outside a company building parts)
(1part)
0yen〜20,000yen
Model production charges(none of outside a company building parts) 120,000yen〜
Work charges to put(Bring in parts) 35,000yen
Work price to put(One area half day) 35,000yen-250,000yen x The work number of people
Work price to tear off(One area half day) 35,000yen-250,000yen x The work number of people
Punching work price(One tank) 3,500yen
Medium-and-long term exterior polyvinyl chloride, iron print (half cut) 3,500yen x The number of the square meters
MAX-PROTECT specifications (die cut) 6,000yen x The number of the square meters
Subdivision delivery of goods of the half cut 3,000yen-6,000yen x The number of the square meters
*For types that we do not have molds for, we will need to make molds.
*Shipping costs for parts will be borne by the customer.
*For genuine parts and non-manufactured parts that are not mass-produced, the labor charge will be determined based on whether or not they are expected to be used next time, so please contact us separately.
*The installation fee will be 5,000 yen UP if the car is left unpeeled or unwashed, so please make sure it is in good condition.
*In the case of a business trip (pasting construction), the half-day wage starts from 35,000 yen, and additional transportation expenses, accommodation expenses, etc. (if far away) are required.

DELIVERY DATE
WORK DETAILS PERIOD
Design & data production 1 - 2 weeks
Production of the product 1 week
PUT/TEAR OFF Half day - around several days
Urgently (lower than one week) From minimum period of three days
2 production costs surcharges
MAX-PROTECT SALES(MADE TO ORDER) 3 - 4 weeks
Delivery time is the total number of days for all work.


SHIPPING FEE
YU-PACK LIMITED TO JAPAN(PREFECTURES) FEE
Honshu, Shikoku 1,360yen
Kyushu 1,460yen
Hokkaido, Okinawa, remote islands 1,960yen
*If the return of the molded parts is included, the shipping fee may increase (400 yen more).
*Rolls of MAX-PROTECT(MP2, MP3) are handled as large.
*The above shipping and cash on delivery fees do not apply to products shipped directly from the manufacturer, large products, and some mail order products, so please contact us separately.

CASH ON DELIVERY FEE
Yupack cash on delivery fee FEE
Up to 50,000 yen 449yen
50,000 yen or more 643yen
*Cash on delivery shipping is limited to Yu-Pack.
*Cash on delivery fee is calculated based on the price including shipping.